Entrance, Parking & Traffic

Automated Gates

Automated vehicle and pedestrian gates provide controlled access with safety devices and operator interfaces.

Discuss a Project

Automated entrance barrier

Representative photography

Representative photography for context—not a SNDIAN project reference or product specification.

Overview

Automated gates combine a mechanical gate, drive, safety devices and control logic. The design must account for geometry, usage frequency, safe movement, emergency operation and the access-control interface rather than treating automation as a standalone motor.

Capabilities

Gate type and duty-cycle selection
Safety edge, photocell and obstacle protection interfaces
Credential, intercom and remote operator controls
Manual release and emergency behavior planning
Status monitoring and maintenance access
Site testing of safe operation and control sequences

Deployment considerations

Design for the site, not only the specification.

01
Survey geometry, traffic flow, accessibility, peak demand and safe vehicle or pedestrian movement.
02
Coordinate civil works, loop/sensor positions, lanes, controllers, power, communications and exception handling.
03
Test normal, emergency and degraded operation with site operators before acceptance.

Architecture

System components

01Gate leaf or barrier mechanism
02Drive motor and controller
03Safety photocells and edges
04Access reader or intercom interface
05Loop detector or vehicle sensor
06Local isolator and control station

Integrates with

Applications

Commercial vehicle entrancesResidential compoundsIndustrial sitesInstitutional facilities

Related technologies

FAAC
Gate automation, entrance management and barrier technologies.

Specifying Automated Gates?

Share the requirement, site and stage. Documents can be shared after the initial enquiry if needed.